|
Advanced CHP Cogeneration Technology. Click on the Image to read our latest NEWSLETTER.
|
Not since the energy crisis of the mid-1970s has there been so much public awareness about energy, its availability, public health risks, its cost, its conservation, the need to consider smarter ways to generate electricity, and to implement renewable energy resources into the overall mix of power generation. This month newsletter is packed with valuable insights into biogas CHP, distributed energy and natural gas cogeneration. We added new features that provide helpful tips, best practices, exciting product news, and lots of useful information.
|
2G®'s LFG Landfill Biogas Power Module. A unique and smart Design, manufactured like nothing else available in the Market.
|
2G® was selected to supply a 1 MW/h High Efficiency LFG Landfill Power Plant to be installed in Pontotoc, Mississippi, powering 900 Homes and reducing CO2 Emissions
Three Rivers Solid Waste Management Authority (TR SWMA) decided on its newest power plant fueled by landfill methane biogas. The power generation facility is located at the regional landfill just a few miles north west of Pontotoc. The 1,000 ekW/h (1MW/h) renewable energy plant will generate enough electricity to power about 900 homes in Mississippi. Read more CLICK HERE
|
Best In Class Technology - Modular Biogas CHP at Clovermead Dairy Farms. Whether its an Anaerobic Digester Biogas Application at a Dairy Farm, or any other Organic Waste to Energy Conversion Project, or a WWTP Biogas Facility, 2G's genuine modular CHP's are the most cost-effective Solution.
|
2G® Biogas Cogeneration System arrives at Clovermead Dairy Farms in Alma, Ontario, Canada
On February 17th 2011 the 2G® modular biogas CHP cogeneration system arrived at Clovermeads Farms in Alma, Ontario. This leading edge 250ekW/h biogas CHP module provides the dairy farm operator with an electrical efficiency of 39.10% and 1,068,000 BTU/h thermal energy. This "Modular Approach" to CHP cogeneration is fast becoming a preferred method, driven by a heightened awareness and demand for more cost-effective and proven system solutions, higher efficiency, lower maintenance cost, and the need for higher durability, quality, and to lower the technical risk. Read more about our “Best In Class” CHP modules CLICK HERE
|
2G® Smart Phone App
|
Launching the 2G® System Monitoring Smart Phone App
The latest addition to 2G®’s remote system monitoring technology is a Smart Phone App with great capabilities. To complement 2G®’s remote monitoring system (SCADA, DSL, Phone & Broadband Cable), customers have now the option to utilize a smart phone application to monitor their power generation facility from most smart phones (iPhone, Android, iPad, or Windows-based smart phones / handhelds), from anywhere in the world. Read more CLICK HERE
|
The 2G agenitor Series 206 - 220ekW/h, 306 - 250ekW/h, 212 - 400ekW/h, 312 - 450ekW/h, Twin Pack - 500ekW/h. A new Standard in the Industry !
|
The latest Addition to 2G®’s Product Line is the agenitor® 312 with 450ekW/h output, setting a new and unmatched Standard in the Industry
The new agenitor® 306 is 2G®’s addition to the 6-cylinder line of engines. After introducing the 206, rated 220ekW/h in 2009, the 306 is now providing a continuous output of 250 ekW/h. That’s a significant improvement, and fills the gap in the 0.25 MW/h high efficiency CHP range. Also read about the new 500ekW/h Twin Pack - The Smart Choice, and 2G® CHP Systems coupled with Steam Generators. Project developers, operators, and system owners, today rely on a widening range of energy-efficient CHP methods, and cost-effective systems to make new projects more economical and help to stretch their long-term operational budgets. In addition to saving money, customers that make system efficiency a priority not only operate better cogeneration plants, but understand the wider impact that their decisions to implement advanced technology have on reducing technical risks, operational quality and the overall bottom line. Read more CLICK HERE
|
Click on the Image to read our NEWSLETTER. You can also go to our Website and find the newsletter in our ABOUT Section, including the Archive of previous Publications.
|
We are really excited to announce a new partnership with the reputable Dairy Farm Expert DariTech in Washington. More Partner and 2G Team News CLICK HERE
With more than 1500 CHP systems supplied and installed, and unmatched “Best-In-Class” technologies in our market segment, we offer our customer’s solutions like nobody else. Whether you are interested in biogas CHP (anaerobic digestion, LFG, or WWTP applications), syngas to energy conversions, or natural gas cogeneration, we have a suitable solution for you. Please don't hesitate to contact us for more information, or visit our WEBSITE.
2G-CENERGY Power Systems Technologies Inc.
151 College Drive - 15, Orange Park, FL 32065 - USA Tel.: 904-579-3217 / 579-3057 E-Mail:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Visit our Website at http://www.2g-cenergy.com
|
|
|
|
|
A new type of maglev vertical axis wind turbine
Product Feature:
1 can start 1m/s, unlitize more low wind speed energy 2 vertical axis, whatever wind come from any direction,it can utilize it. In Shenzhen,China it can runs over 300 days one year. 3 run low noise. Because of its special structure(Darrieus and special wind cone),the blade and the cone is almost no vibration,so it has low noise.
|
|
 |
|
WALKI BIOMASS COVER: EASY COVER-UP IMPROVES DRYING PROCESS AND ENERGY CONTENT OF ENERGY WOOD
Logging residue is an inexpensive and easily accessible source of biofuel, but to improve the energy content it must first dry on the ground and after that it can be stored in piles for several months. To shelter the piles from moisture through rain, snow and ice, Walki has developed a paper-based, waterproof cover that can be chipped and burned together with the residue. The importance of biofuels is increasing globally due to tightening emissions restrictions. Interest in wood-based biofuels has also increased because there are new combustion technologies available on the market that are suitable for solid biofuels. At first glance, Walki’s biomass cover doesn’t look very high-tech, but it’s an ingenious invention that very efficiently improves the energy content in logging residue. The cover itself is a four-meter wide laminate, mainly produced from renewable fibrous materials. It shelters the top of the pile but leaves the sides open, allowing moisture to evaporate. A very thin plastic layer within the cover makes it both waterproof and very strong, but thanks to the characteristics of the plastic, the cover can be chipped along with the residue and used as fuel as well. “The biomass cover is already the widest of its kind on the market and the production is constantly growing. Now we are also developing a six-meter wide version that can cover even bigger piles of logging residue and other wood-based biofuels,” says Hannu Nieminen, Product Line Manager at Walki. In addition to shielding the residue from water and snow, the biomass cover also protects the residue from freezing, which can transform the pile into an icy heap that’s almost impossible to handle and has low energy content. “The phenomenon is familiar to anyone who has piled chopped firewood outside and forgotten to cover it,” says Mr. Nieminen. “In the wintertime, the wood is icy and heavy and produces much less heat than dry firewood.” In phase with the environment Finland and Sweden are pioneers in harvesting energy wood, but because energy saving and biofuels are the latest buzz, interest in the technology is increasing in other parts of the world as well. “Energy wood is, in many countries, an almost unused resource for producing energy in an environmentally sound way,” says Mr. Nieminen. “Our product maximizes the energy value of logging residue; measurements have shown that the solids content of wood can be raised by as much as 15% by using the cover.” In Finland, the main reseller of Walki’s biomass cover is Uittokalusto Oy, a Finnish company owned by Grube KG Forstgerätestelle of Germany. The company has been selling the cover for about five years now and is very pleased with the feedback from customers. The main customers are big forest companies in Finland and their subcontractors. “The cover is easy to spread with the same machinery that gathers the residue in the woods,” says Ilkka Leskinen, Sales Manager at Uittokalusto. “Our customers are satisfied with the benefits of the biomass cover and how easy it is to use the product.” /ins Walki in brief Walki Group is a leading producer of technical laminates and protective packaging materials, specializing in the production of fiber-based, intelligent, multilaminate products for markets as diverse as energy-saving construction facings to barrier packaging applications. Walki Group has operations in Finland, Sweden, Germany, Poland, the UK and China with a workforce of about 1,000. Annual net sales for the Group are EUR 300 million. Text and images are available at http://ins-news.com/en_UK/100/861/2018, or request via e-mail from
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
(enter "PROJ00276" in the subject line). Caption 1: Residue covered with the Walki Biomass Cover become drier than piles which are left uncovered. © Walki Group Caption 2: Using Walki’s biomass cover is very simple. Just lay it on the residue with the same machinery used to gather it and then chip everything together. © Walki Group For more information, please contact: Walki Group Hannu Nieminen Product Line Manager Tel: + 358 (0)205 36 3006 Fax: + 358 (0)205 36 9018 Mobitel: + 358 (0)400 620 427 E-mail:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Walki Group Tommi Lehikoinen Business Development Manager Tel. +358 (0)205 36 3070 Fax: +358 (0)205 36 9018 Mobitel: +358 (0)40 584 2324 E-mail:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
www.walki.com
|
|
 |
|
Biogas Cogeneration Plant for the University of Wisconsin Oshkosh to produce Electricity and Heat

2G - CENERGY received an order for a biogas CHP cogeneration plant to be installed in Oshkosh, Wisconsin, supplying the University Campus with electricity and thermal energy.
|
Journal of Power Technologies
We are proud to announce the re-launch of our scientific periodical: the Journal of Power Technologies - the new name for the Bulletin of the Institute of Heat Engineering. Our flagship publication has a distinguished past, first appearing in 1965, and from the very beginning adopted a strong international approach, every paper having both title and abstract translated into German, English and Russian.
|
|
|